PCB Laser and CNC Milling
In the previous post, i was made PCB using CNC milling, the result is satisfying, but the problem is the bit is often replaced. So i upgrade my CNC to add laser cutting. The laser use for mark the pcb for etching later, and CNC use for drilling and cutting. The result is so satisfying.
![](https://blog.arnas.web.id/wp-content/uploads/2022/02/20220101_172806-1280x719.jpg)
![](https://blog.arnas.web.id/wp-content/uploads/2022/02/20220111_180712.jpg)
![](https://blog.arnas.web.id/wp-content/uploads/2022/02/20220111_214227-720x1280.jpg)
Leave a Reply